Может кто хочет Nukeproof Generator Rear MTB Hub Short Cassette
Q
Q-desnik
Чайник прислал не то колесо, вместо обычного Nukeproof Generator Rear MTB Hub 135Х12 - такой же но с коротким барабаном.
Мне он никак не пригодиться. Пока веду ожесточенную переписку с чайником, изучу спрос, вдруг кто мечтал о таком чуде.
Фотография из Фотогалереи на E1.ru
Фтулка в колесе
http://www.chainreactioncycles.com/ru/en/nukeproof...
вот таком.
Втулка желтая.
Хочу 99 баксов за него.
Резерв за Werebear
[Сообщение изменено пользователем 06.08.2014 20:49]
Мне он никак не пригодиться. Пока веду ожесточенную переписку с чайником, изучу спрос, вдруг кто мечтал о таком чуде.
Фотография из Фотогалереи на E1.ru
Фтулка в колесе
http://www.chainreactioncycles.com/ru/en/nukeproof...
вот таком.
Втулка желтая.
Хочу 99 баксов за него.
Резерв за Werebear
[Сообщение изменено пользователем 06.08.2014 20:49]
O
Ouninpohja
фтулка крутая
Q
Q-desnik
фтулка крутая
был бы байк под нее оставил бы, выглядит офигенно с 2/3 кассеты, очень аккуратно минималистично без колхоза, но я такое не катаю и нет байка под нее и не планируется
Q
Q-desnik
Рассмотрю варианты обмена! Нужна втулка.
Q
Q-desnik
M
Megerka
Q
Q-desnik
Nukeproof Generator SC Rear Hub – 135mm x 12mm 2013 – 32h
New for 2013 the Nukeproof Generator short cassette (SC) rear hub has been designed specifically for slopestyle, 4X, trials and dirt jumping disciplines where riders seldom need the full range of gears across a 9 or 10 speed cassette. With the short cassette design we have been able to increase the hub flange distance which results in building a stronger wheel whilst the shortened freehub body still provides adequate space to allow you to run the top 7 cogs on a 10 speed cassette or the top 6 cogs on a 9 speed cassette.
Featuring a 135mm x 12mm bolt-thru hub body with steel cassette carrier, the Generator SC is engineered from tough but lightweight 7075-series aluminium. Cold-forged construction delivers optimum strength and fatigue resistance while extensive CNC machining shaves excess weight without compromising structural integrity.
The hub features a total of four sealed cartridge bearings: one on the drive side, one on the non-drive side and a further two in the freehub body.
A low friction seal between the bearings and freehub body eliminates contamination of the bearings from ingress of water and dust.
Available in black, silver or Nukeproof yellow.
Nukeproof Generator SC Rear Hub Features:
7075 alloy main hub body
7075 alloy sub axle
Alloy freehub body with 30T steel ratchet
6 pawls with leaf springs
3 x Sealed 6902 & 1 x sealed 15268 bearings
32-hole
International Standard 6-bolt disc brake interface
New graphics for 2013
Designed to fit frames with 135mm x 12mm thru-axle hub spacing. Short Cassette body is designed for use with 7-10speed cassette cogs or 6-9speed cassette cogs
Nukeproof Generator SC Rear Hub Specifications:
Width: 135mm x 12mm
67mm flange diameter
Spoke PCD 58mm, spoke hole diameter 2.3mm
Left side Axle edge-to-flange diameter: 35.5mm
Right side Axle edge-to-flange diameter: 37mm
15.3mm end of axle to disc mount face
New for 2013 the Nukeproof Generator short cassette (SC) rear hub has been designed specifically for slopestyle, 4X, trials and dirt jumping disciplines where riders seldom need the full range of gears across a 9 or 10 speed cassette. With the short cassette design we have been able to increase the hub flange distance which results in building a stronger wheel whilst the shortened freehub body still provides adequate space to allow you to run the top 7 cogs on a 10 speed cassette or the top 6 cogs on a 9 speed cassette.
Featuring a 135mm x 12mm bolt-thru hub body with steel cassette carrier, the Generator SC is engineered from tough but lightweight 7075-series aluminium. Cold-forged construction delivers optimum strength and fatigue resistance while extensive CNC machining shaves excess weight without compromising structural integrity.
The hub features a total of four sealed cartridge bearings: one on the drive side, one on the non-drive side and a further two in the freehub body.
A low friction seal between the bearings and freehub body eliminates contamination of the bearings from ingress of water and dust.
Available in black, silver or Nukeproof yellow.
Nukeproof Generator SC Rear Hub Features:
7075 alloy main hub body
7075 alloy sub axle
Alloy freehub body with 30T steel ratchet
6 pawls with leaf springs
3 x Sealed 6902 & 1 x sealed 15268 bearings
32-hole
International Standard 6-bolt disc brake interface
New graphics for 2013
Designed to fit frames with 135mm x 12mm thru-axle hub spacing. Short Cassette body is designed for use with 7-10speed cassette cogs or 6-9speed cassette cogs
Nukeproof Generator SC Rear Hub Specifications:
Width: 135mm x 12mm
67mm flange diameter
Spoke PCD 58mm, spoke hole diameter 2.3mm
Left side Axle edge-to-flange diameter: 35.5mm
Right side Axle edge-to-flange diameter: 37mm
15.3mm end of axle to disc mount face
Наверное, отвалюсь, начинать сборку вела со втулки специфического цвета как-то не совсем, чтобы совсем.
W
Werebear
Хотеть! написал в личку
Авторизуйтесь, чтобы принять участие в дискуссии.